French pricking iron Amy Roke 3.38mm (2+8 prongs)

High quality french (european) pricking irons from Amy Roke, made from tool steel and has polished prong. There are two types of chisel: Obverse and Reverse. 

Strong texture makes it uneasy to distort and break. Sharp teeth are helpful to punch quickly and effortlessly. These punch will really develop your hand stitching efficiency and will produce extremely clean stitches. Simply place over the leather you wish to sew and hammer, punching holes all the way through your leather in thickness 4.5mm or below. No need for an awl, just punch and sew.

Prong's spacing: 3.38 mm (8 stitches per inch)

Prongs qty: 2 + 8

Prong size: 9.8 mm x 2.4 mm x 0.2 mm

One set contains of two chisels that has 2 and 8 prongs.

Please note the prongs are designed to snap, rather than bend, to give ultimate hardness and prevent undetected bent prongs from ruining your leatherwork. Therefore, always use a soft headed hammer or mallet (never metal) and tap it into your leather work gently. When removing the prongs from your leather always pull it out of your leatherwork straight, never shift it side to side to loosen it or this could snap the prongs. It is recommended to lubricate your prongs with wax from time to time to allow for easier removal.